Turbojet engine test bench

A linear bearing slide rail is installed at the bottom of the test platform, and the parallelism of the slide rail is ≤ 0.02mm; The thrust measurement sensor is installed in the test platform with accuracy of C3. The sensor is directly connected with the platform. When the turbojet / turboprop engine is tested, the thrust / tension generated by the engine can be measured directly;
Overall thrust test range of platform: ≥ 150kgf;
The platform thrust calibration device is configured to calibrate the measurement accuracy of the overall thrust of the test platform;
Fixed turbojet / turboprop engine mounting bracket on the upper part of the platform is used to install the engine;
The test platform can be installed on the system board as a whole and connected with the board.