10000Nm 15000rpm Digital Torque Flange For Wheel Load Simulation

10000Nm 15000rpm Digital Torque Flange For Wheel Load Simulation
 
10000Nm 15000rpm Digital Torque Flange For Wheel Load Simulation
 
 
Torque sensors
 
The torque sensor with double flange connection torque sensor, MH806 series reaction torque sensor is compact, robust and maintenance-free, with many advantages.
The sensor is based on strain gauge technology, which can provide high precision signal transmission.
The MH806 series torque sensors are designed to perform static torque measurements and dynamic rotation (limited Angle) with high accuracy in both clockwise and counterclockwise directions.
The sensor uses a flange-flange connection aligned with the part under test to measure the level of the small reaction moment.
It is designed with a central through-hole that can be passed through a shaft, cable or pipe.
Key application areas include actuator and valve testing, fastener testing, pump testing, and automotive braking.
 
 
Product features

1. suitable for the measurement of direct torque between the mechanical bolt connection, the maximum deflection Angle is not more than 360 degrees.
2. without preheating, boot can enter the working state.
3. high measurement accuracy, good stability, strong anti-interference.
4. protected by low pressure water jet - suitable for most industrial environments.
5. The sensor can be used independently from the secondary instrument. As long as the sensor is supplied with 5-24VDC power supply according to the pin number, it can output the current, voltage or frequency signal whose impedance is proportional to the torque.

 
 
Technical parameter
 

 
 
Layout