1240nm 380Kw Hydraulic Dynamometer For Turbines

SHD380-3000/5000 hydraulic dynamometer for turbines

Calibration of Dynamometer

Static arm is generally designed as 973.8mm. Put 1 kilogram of weights on the weighting tray and display 10 Newtons correspondingly; 2 kilograms show 20 Newtons.
For structural reasons, if the arm length is enlarged or reduced to a certain magnification, the display value should also be enlarged or reduced to the same magnification.
The specific operation is as follows:
1. Install static calibration tools: calibration arm and hanging basket;

2,For digital calibration of instrument, please read EMC900 instruction for calibration operation.

3,Remove the calibration tool at the end of calibration.

4,EMC900 controller must be restarted until the end of 100 seconds countdown.

Product picture

Characteristic curve

Technical parameters

Product discribtion
 

• Electronic butterfly valve fast load control

• Quick response, suitable for dynamic test